Looking for the brilliant glow of LED lights without the hassle of installing them individually with a soldering iron?

Our LED strips hook up to your car in one easy step, bringing you all the convenience of weatherproof, inexpensive, high tech auto accessory ingenuity.

Very bright and very cool, these strips sell for as little as $8.99 each, give you total lighting flexibility, put next to no drain on your car battery, and no matter whether you use them in hard rain or the driest night on record, they won't fail you.

Hotban LED strips put out a minimum amount of heat, so there's no risk of fire, and they'll fit in a variety of places:

• Around the front grille
• Under foot-wells
• On wheel wells
• In the trunk
• Under the hood
• On headlights
• Along the dash
• Wherever the heck you want them to go!

The only limit is your imagination.

Hotban LED strips come in Blue, Green, Red, White, Orange, UV - BlackLight, Pink, and Million color. Prices range from as little as $3.99 to a max of $71.99, depending on your size and color choice.

Can the LED strips be cut or trimmed?
Yes! You can easily cut the LED strips. Use a sharp utility knife. The LEDs are wired in groups of 3, so you should cut between sets of 3 LEDs.
Note: Some of the shorter lengths can't be cut because of a critical power wire inside. Before you cut, just make sure you won't be cutting a power wire, otherwise your LED strip could be damaged.

Can the cut section of the strip be re-used?
While it is physically possible, it is not a simple procedure and not worth the effort. For practical purposes, you are better off discarding the cut portion.

Once cut, is the strip still waterproof?
If you cut it right, it will maintain a degree of "weather resistance". But to make a cut strip fully waterproof again, we recommend you add some silicone sealant to the cut end.

What is the best way to mount them?
Cable ties, also known as zip ties work for many installations. We also include a surprisingly strong 3M double sided adhesive mounting tape.

How should they be mounted in the wheel well?
Before removing the wheel, you should hold the strip in a few locations behind the wheel until you find a suitable location. Play around with some different options. We find it works best if they are mounted on or behind suspension components.

Do the LED strips require resistors?
No. The LED strips do not require any resistors. They are ready to work on any 12 volt power source.

What is the "Million" color?
The Million color LED strips have red, blue, and green LEDs. They come with a tiny controller which automatically fades through millions of colors. Check out an action video!

Which wire is power and which is ground?
The silver wire is 12v +, and the gold wire is 12v - (ground). If you accidentally reverse them, nothing bad will happen.

Can I use these for underbody glow under the car?
Yes! The result will be fantastic. Try the 6 foot strips for a wheel-to-wheel gapless glow.